Guide to choosing tiles for your home renovation in Malaysia

Tile is used as a floor or wall covering in many Malaysian homes, most commonly the bathroom and kitchen.

And for good reason, too. Tiles are waterproof when properly sealed, durable, and allow you to create almost infinite designs in your home.

There are a huge variety of tile colours, textures and sizes to choose from, not to mention the many ways you can lay them out.

But, the variety also makes it difficult to choose the right tiles for your home. And after you have chosen a design, it can all go wrong if you hire an inexperienced tiling contractor to lay them. Then there’s also the matter of tile prices in Malaysia.

Hire the right tiling contractor for your projects
Recommend.my connects you with tiling contractor for free. Browse our directory, submit your requirements and local professionals will respond with free quotes.

View directory of tiling contractors in Malaysia
Tiles bathroom in Sunway SPL by Movent Design
Tiles bathroom in Sunway SPL by Movent Design

 

Why are tiles so popular in Malaysian homes?

Durability: Tiles are well known for their durability and long-lasting characteristics. When properly installed and cared for, tiles can last a long time without any change in colour or form.

Maintenance: One of the biggest selling points of tiles has to be its low maintenance. Not only do they need very little maintenance, tiles can also withstand heat, water, spills and stains. Normally, soap and water will be sufficient to clean your tile floor. And, if one of your tiles gets chipped or cracked, that single piece can be replaced.

Emissions: If you are worried about exposure to harmful indoor chemicals, tiles emit little to no volatile organic compounds (VOCs) that can cause various health problems. This is because all tiles are baked in high-temperature kilns, which would have removed most of the VOCs that come with them.

Fire resistance: Unlike wooden, laminate or vinyl flooring, tiles are baked in a kiln at high temperatures. This creates a product that will not catch fire once installed.

Design: The most important reason for choosing tiles is in the variety of designs. Homeowners who prefer a clean, matte floor can choose large tile slabs in grey tones. Others may want to create a mosaic pattern such as those found in old European churches or Peranakan houses. Or you may want a tiled feature wall where the tiles are raised to give a staggered 3D effect. Whichever look you are going for, there is a tile design that will suit your needs.

Patterned tile design by Romangranit. Find tile contractors in Malaysia at Recommend.my
Patterned tile design. Source: romangranit

 

WATCH: People are freaking out with these explosive floor tiles

 

Types of tiles

There are three common types of tiles – ceramic, porcelain, and homogeneous tiles. Ceramic and porcelain are used home renovations, while homogenous tiles are used in commercial spaces.

Ceramic Tiles

Ceramic tile is composed of natural clay, sand and water. These ingredients are moulded to form square or rectangular tiles before being baked in a kiln to remove most of the moisture.

Ceramic tiles are mainly used for rooms like living room and bedrooms. Designed to be used indoor, ceramic tiles are also suitable to be installed as wall tiles due to their lightweight. They are lighter and available in both gloss and matte finishing. They are also considered the most basic tiles and the cheapest amongst the three.

According to Citicon Ceramic managing director Joe Chew, “lighter tiles are preferred for the walls, to reduce the risk of them falling off. The smaller the tiles, the better they stick”.

Mixing different tile designs for the wall. Source: Guocera
Mixing different tile designs for the wall. Source: Guocera

 

Porcelain Tiles

Porcelain tiles are also made from clay, sand and water. However, the density of the clay used in porcelain tiles is higher compared to those used for ceramic. Porcelain tiles are baked at a very high temperature for a long period of time so that almost all moisture is removed. The denser clay and longer drying time make porcelain tiles much harder and durable than ceramic.

Porcelain tiles are available in a huge variety of colours, designs, and surfaces. Not only do they come in both gloss and matte surfaces, they also have other unique appearances like sugar surface, which can bounce back light that shines on them.

Porcelain tiles are very versatile as they can withstand heavy foot traffic and stronger resistance against wear and tear. This makes them suitable to be installed for both indoor and outdoor use as well as light- or medium-duty commercial applications. Porcelain tiles are normally found in bathroom, kitchen, porch and balcony.

 

Homogeneous Tiles

Homogeneous tiles are also known as heavy-duty tiles, and are mainly used in commercial applications for places like shopping malls, airports and hospitals, with very heavy foot traffic. As its name suggests, these tiles do not have any fancy textures or designs and most of them come in solid colour. They are even harder and more durable but also much more expensive than porcelain tiles.

The popular brands of tiles that can be found in Malaysia are White Horse, Guocera, Kimgres, Alpha, Venus, MML, Niro, Johnson, and Feruni.

Tiles that resemble wooden flooring. Source: Guocera
Tiles that resemble wooden flooring. Source: Guocera

 

Where to install tiles in your home

Because tiles are so durable and water resistant, they are best suited in the bathroom. The floor and walls around the shower and bathtub area are where you would find the best application of tiles.

When installing floor tiles for wet areas such as the bathroom, remember to ask for tiles that have higher slip resistance

The next natural location to use tiles is as kitchen tiles. Many older kitchen counters were built as a concrete platform and covered with tiles. Many of these counters are still going strong, even after 30 years! However, instead of tiling the counter, you can also use kitchen tiles on the floor and the backsplash.

However, tiles are not limited to the bathroom and kitchen alone. Many landed properties prefer to use heavy-duty porcelain tiles in their driveway for minimal maintenance. The same goes for balconies. And for the Peranakan touch, you can add the occasional decorative tile above your doorway or along the kitchen backsplash.

Sample catalogue of decorative painted, or majolica tiles. Commonly used in Peranakan homes. Source
Sample catalogue of decorative painted, or majolica tiles. Commonly used in Peranakan homes. Source

 

How tiles are installed

A proper tile installation process includes:

  • Hacking. If existing tiles are being replaced, they will need to be removed
  • Waterproofing: A waterproof membrane is painted onto the subfloor and left to dry. Waterproofing is needed for wet or outdoor areas such as the bathroom, swimming pool, backyard, or balcony
  • Screed / levelling: Adding a layer of cement to make the floor level
  • Installation: Tiles are installed by applying a mortar (or thinset) to the floor as well as the underside of the tile. The thinset acts as a glue that holds the tile to the floor. The same method is used for applying tiles to the wall. For better adhesion and drying, contractors will use a modified thinset that contains latex polymer (locally known as susu gum)
  • Grouting: Grout is used to fill in the gaps between tiles
  • Sealing: Grout is sealed to make it waterproof

“Some owners may skip the levelling process to save cost, but is risky as an uneven subfloor may cause water retention and eventually lead to cracking, buckling or tiles becoming uneven,” – Joe Chew, Citicon Ceramic

 

What are the tile prices in Malaysia?

Like all renovation services, tiling works are costed by materials and labour. However, labour charges will make up the bulk of the cost, due to the skill needed in tiling.

A 30cm x 30cm ceramic tile can cost around RM1.80 per piece, while a porcelain tile of the same size costs RM2. Just for comparison, a heavy-duty homogeneous tile of the same size may cost up to RM2.70 per piece. So, a typical bathroom of 60 sqft would cost about RM120 in tiles alone.

According to Chew, contractors will typically include the cost of tiles into the total charge, and calculate the installation by the total square footage of the area.

This means tile prices including installation in Malaysia ranges between RM11.20 to RM14.80 per square feet, depending on the type of tile that is chosen. “Normally, the bigger the tile size, the costlier it will be,” he said.

This bundled cost also includes building materials such as mortar, as well as labour for installation, and rubbish disposal afterwards.

Of course, there are handcrafted premium tiles that can go for RM40 per piece. But these are limited to decorative, hand-painted tiles commonly found in old Peranakan homes.

 

Popular tile designs

There are so many possible designs that it’s difficult to say which ones are the most popular.

Many years ago, the trend would have been to use smaller tiles in a mosaic tile pattern. But, according to Chew, the current trend in Malaysian homes is to have large floor tiles, with smaller mosaic patterns used sparingly.

The reason for this is to reduce the amount of grout lines that can get dirty. Less grout lines also make the room feel bigger. However, the drawback is that larger tiles can be slippery, since there are no grout lines to add more grip for your feet. Therefore, make sure you install tiles with higher slip resistance in high traffic areas.

The common size of tiles for bedroom and living area is 80cm x 80cm while 60cm x 60cm is used mainly for kitchen. For bathroom, 30cm x 60cm is the popular choice.

As for tile designs, tiles that resemble natural stone and marble are the popular choices amongst homeowners. Chew said this is because many homeowners use tile to bring in a natural look into their homes.

However, there are also newer tile designs that resemble wood. This type of tile is becoming popular because home owners want to create a Scandinavian interior design in their homes that incorporates light-toned hardwood flooring, even in the kitchen.

However, since they don’t want the hassle of maintaining a wood floor, many are choosing tiles with wood designs.

Tiles laid in staggered offset to resemble wooden planks. Source: Hafary
Tiles laid in staggered offset to resemble wooden planks. Source: Hafary

 

“Tiles with wood-like appearance can be installed in areas with high humidity like the bathroom, without the limitation of real wood,” – Joe Chew, Citicon Ceramic

Since all tiles are long-lasting, the main factor when purchasing tiles would be the price. “Choose what is within your budget. Of course, when you have a huge budget, you may have a wider selection that offers you a variety of designs and textures,” he said.

Also bear in mind to check the tile finishing when you are shopping for tiles. “You may need to see how delicate the printing of the design and the texture is. If you are choosing something wood-like or stone-like, do check how strong is the resemblance of it is to the real thing,” he said.

 

Do you love the look of tiles in your home?

Your floor and walls make up the biggest dimension of a home. And by installing tiles, not only will they make your home beautiful, it will last a long time, and is easy to clean.

However, when designing your home with tiles, the true beauty can only be seen when they are chosen and installed properly.

So, make sure you understand the characteristics of the tiles you are choosing, and find a professional tiling contractor in Malaysia to carry out the job for you.

View directory of tiling contractors in Malaysia

2 thoughts on “Guide to choosing tiles for your home renovation in Malaysia”

  1. Pingback: How to choose the right flooring for each room in your house - Recommend LIVING

  2. Pingback: Bathroom Tiles Design Malaysia - Rumah Terkini

Leave a Comment

Your email address will not be published. Required fields are marked *